Gligli P600 Noise Mod Version 2.20 JRS

 

I updated Gligli 2.1 RC3 to Version 2.20 Noise Mod by adding the following features:

1) Three (3) new LFO waveforms added: reverse saw (revsaw) from Overcycler  gligli/overcycler: Hybrid polyphonic wavetable ... - GitHubgithub.com › gligli › overcycler 

as well as adding Step8 and Seq from JHHL's code http://jhhl.net/Software/p600.html 

The new LFO waveforms are paired as follows: 
Step8-RevSaw
Seq-none

Thus, you would select "step8-RevSaw" and the LFO waveform switch would be in the "up" position (like for triangle, saw, and sine) to select RevSaw.


Note, if the LFO switch is in the "up" position and "Seq-none" is selected, currently the LFO would be disabled, e.g., there would be no output. I am going to replace "none" with a new waveform when I get a chance. I may add Step4 just to plug in the hole.


2) New Pitchbender target VCO B only (note the second new pitch bender target "PW" does not work yet) 


3) New noise source setting control. Pressing "to tape" 0 a second time lets you adjust the VCF CV input level and store it with a patch. I modified my P600 to add a noise source and use this parameter to adjust the noise source per patch, hence in the UI this displays as "noise".

If you notice any bugs, let me know. And as always, back up your patches before trying this update out.

Here is a zip file of the .SYX file:

https://github.com/matrix12x/p600fw/...bb834a4422cef5


Also, I'm working on adding aftertouch (e.g., not from the intern keyboard since it does not have aftertouch, but as received from an external controller keyboard via MIDI).


Going to try that out today. I will post the update when it works.

Comments

Post a Comment

Popular posts from this blog

Prophet 600 Noise Source Modification

Image
So, I modified my  Prophet 600  to have a noise source, with a level parameter that is storable with a patch. I was inspired by a Japanese  Prophet 600  mod I saw online a while back. He documented what he did very well.  http://prophet-600.blogspot.com/2014/09/prophet-600-adding-noise-waveform.html The goals were as follows: 1) Modify the GliGli FW to add a noise source using what was the external filter CV input  2) rewire the external filter CV so I still have an external filter CV and it no longer goes thru U458 (CEM 3360) 3) build a hardware noise source run it through U458 which is under software control, accessible using "To tape" and pressing 0 twice ("To tape 0 twice" is/was a duplicate arpeggio speed control.) So here is where I'm at: 1) The code is done and works. I can save and recall the Noise parameter and the code controls U458 to make the noise level settable by the front panel. The code I modified so far seems stable. 2)  I cut a trace leading f
Read more

Prophet 600 Poly Mod VCO B to modulate VCO A

Image
So, I don't like how the Prophet 600's VCO A changes in pitch (not just timbre) when using Poly Mod VCO B to modulate the pitch of VCO A even on the original factory OS. It is not a software thing, it's the hardware itself.  The circuit that feeds VCO B's output to the CV input of VCO A is not AC coupled (it does not have a DC blocking cap). Thus a DC offset is introduced which changes the tuning of VCO A by raising the pitch. I hate this. I never use Poly Mod VCO B to modulate the pitch of VCO A.  I held down a single note with Saw wave selected on VCO A and VCO B was zero volume. No  Poly Mod . Here I added some FM (frequency modulation) to VCO A (Saw wave) in an unmodified Prophet 600 by using Poly Mod VCO B to VCO A frequency. If you look at the fundamental, it goes up in frequency relative to the first image. My thought were to mod the Prophet 600 to add a DC blocking cap, for example between the 4061 (e.g., U429 pin 1) and the CV in (pin 15) for VCO A (e.g., U28 C
Read more

Gligli P600 Noise Mod V2.32 JRS

Image
*****New V2.32 update****** I've updated the OS V2.32 to add as a vibrato LFO-target: filter resonance. It's very cool, especially when the filter cutoff frequency is relatively low. For example, I set the vibrato shape to pulse or random and the depth to full and it has a nice effect. The update also increases the range for the target of noise level (CV in on a P600 without the noise source mod from my earlier post) and speeds up the main volume knob considerably.  To be honest, I leave mine on max all the time, and never saw its speed as an issue. But I saw an easy fix and did it. Zip file with the .syx and .hex located here:  Download
Read more